sunfish to sneak box conversion

jarred cudeyro

New member
The first thing I did was to cut the cockpit wider and fill the keel and mast with expanding foam.
[inline C:\Users\jeff\Downloads\sunfish 1.jpg ]

Then I removed all the floatation foam because it was water logged and glassed the foam to keep the water out. I also filled the hole for the skeg.
[inline C:\Users\jeff\Downloads\sunfish 2.jpg]

The next thing I did was put a wood trim around the cockpit to make it stronger

[inline C:\Users\jeff\Downloads\sunfish 3.jpg]

I put on a motor mount and painted the boat.

[inline C:\Users\jeff\Downloads\sunfish 4.jpg]

The 5th and final step was to make the blind

[inline C:\Users\jeff\Downloads\sunfish 5.jpg]
 
Last edited by a moderator:
Unfortunately I can't see your pictures.

Looking at the links provided it appears the pictures are on your personal computer and not uploaded to the duckboats site. You can either upload them here or save them using a site like photobucket and share from there.
 
Back
Top