Tipper/ Duck Butt

Dtown

New member
Hey guys, I was looking for a pattern idea on a tipper or duck butt decoy pattern. Thank you
 
I make them from my rejects! Though, I am casting foam. When I have a body that does not fill or has a void in the breast, I cut it off at an angle. Bore a hole deep and glue in a pvc pipe. Then restle coat and paint it up. I made feet from the neoprene of waders, painted orange (mallard) and screwed and glued them on the bottom to flop around when the decoy bobs. Took a little playing with strap weights to get the balance right. I have a pintail body that will be done next as it was first fill try of a new body mold.
 

Attachments

  • 277668330_10229750504893133_5030668951020420254_n.jpg
    277668330_10229750504893133_5030668951020420254_n.jpg
    421.7 KB · Views: 25
  • 322176166_1471959099961874_8791731301270623618_n.jpg
    322176166_1471959099961874_8791731301270623618_n.jpg
    157.5 KB · Views: 26
  • 322090418_1199426063983827_2944342511407728143_n.jpg
    322090418_1199426063983827_2944342511407728143_n.jpg
    128.4 KB · Views: 25
  • 322331817_550284737022198_9182484081370959593_n.jpg
    322331817_550284737022198_9182484081370959593_n.jpg
    110.1 KB · Views: 24
  • 322402392_1332255397533131_1149429329023752389_n.jpg
    322402392_1332255397533131_1149429329023752389_n.jpg
    136.9 KB · Views: 28
I make them from my rejects! Though, I am casting foam. When I have a body that does not fill or has a void in the breast, I cut it off at an angle. Bore a hole deep and glue in a pvc pipe. Then restle coat and paint it up. I made feet from the neoprene of waders, painted orange (mallard) and screwed and glued them on the bottom to flop around when the decoy bobs. Took a little playing with strap weights to get the balance right. I have a pintail body that will be done next as it was first fill try of a new body mold.
Dave,

I collect tip up decoys. I have over 400 of them. Would you have a mallard pair for sale?

Jeff Churan
Jeffc@greenhills.net
(660) 646-8180
 
Back
Top