Alrighty, I asked earlier about camper help and these latches. I figured out what kind of latch I need for the front window that is kept down and through my searching it is called a cam latch. I called camping world as well as Coachman/Fleetwood. I also sent emails and pictures to both places. I was told parts are no longer available through the manufacturer because those campers are so old and no longer made. Camping world has been less than helpful and they can't find latches similar to what I have...even told me what is in the store (which here in tallahassee is a micro sized store) is all we have. I did some internet searching and McMaster-Carr has tons of latches but I don't know that I am reading the schematics and measurements to know for sure if I am looking at the correct thing. It does not need to lock, though if it does then okay.
McMaster-Carr
Here is a shot of the latch I am trying to replace (I actually need to replace two). If I could just get a replacement metal latch piece that would be fine by me. I can get new washers for where I need washers. But I don't know where to find something like that, or even know what to call it. If you look close on the picture that has the latch mostly put together, the metal piece actually has a protrusion on it so that it slides inside the plastic piece and will go only so far.
View attachment cam latch measurements.jpg
Soooooooooo with these measurements, is there anyone here that might be able to help me find what I need? If the measurements are not clear, or I need to measure something else that I didn't think of, that isn't a problem. Just let me know. I can buy a replacement latch or I would be happy with just the metal part of the latch. I just don't want this nasty, awful, crusty rusted thing on my camper.
Thanks a ton in advance for any help
Dani
McMaster-Carr
Here is a shot of the latch I am trying to replace (I actually need to replace two). If I could just get a replacement metal latch piece that would be fine by me. I can get new washers for where I need washers. But I don't know where to find something like that, or even know what to call it. If you look close on the picture that has the latch mostly put together, the metal piece actually has a protrusion on it so that it slides inside the plastic piece and will go only so far.
View attachment cam latch measurements.jpg
Soooooooooo with these measurements, is there anyone here that might be able to help me find what I need? If the measurements are not clear, or I need to measure something else that I didn't think of, that isn't a problem. Just let me know. I can buy a replacement latch or I would be happy with just the metal part of the latch. I just don't want this nasty, awful, crusty rusted thing on my camper.
Thanks a ton in advance for any help
Dani