Hi guys,
My wife bought a vest for my dog and I have some concerns with the fit. My dog is a lab that weighs 60lbs. and is 6 years old. I've double checked the measurements and everything is within specs as far as what the package calls for. When I close up the vest, the overall fit (diameter wise) is real good ( nice and snug but not too tight)around his chest and stomach.
The front leg openings are somewhat loose but there is no adjustment in the cut or fit for this area (can make them bigger by cutting out material but not smaller). I'd like to see a tighter fit where the neck meets the chest but the next smaller size would be too small for the rest of his body.
Besides the fit in the neck to chest transition area, my biggest concern is fitting around his "privates". Right now the vest length is evenly cut all the way around. If left this way, his penis would be covered. Am I correct in assuming that it should be exposed? If so, I would need to trim about 5 inches on the underside ,tapering around to some trimming of the sides at the hips, continuing on to full length at the spine above the hips.
I'm concerned that if the length at the spine, is 5 inches longer than the length of the underside, the vest will become loose across his lower spine/back area.
I'm not real sure he needs a vest for the warmth but the extra floatation might be nice. I do know that to get any warmth the vest needs to be snug all over and that is what I'm not sure about. I think I can live with the slight looseness at the neck, but do you think the vest will get too loose (in the lower back area) when I trim for his privates?
Thanks for you help. I can take and post pics if they are needed.
My wife bought a vest for my dog and I have some concerns with the fit. My dog is a lab that weighs 60lbs. and is 6 years old. I've double checked the measurements and everything is within specs as far as what the package calls for. When I close up the vest, the overall fit (diameter wise) is real good ( nice and snug but not too tight)around his chest and stomach.
The front leg openings are somewhat loose but there is no adjustment in the cut or fit for this area (can make them bigger by cutting out material but not smaller). I'd like to see a tighter fit where the neck meets the chest but the next smaller size would be too small for the rest of his body.
Besides the fit in the neck to chest transition area, my biggest concern is fitting around his "privates". Right now the vest length is evenly cut all the way around. If left this way, his penis would be covered. Am I correct in assuming that it should be exposed? If so, I would need to trim about 5 inches on the underside ,tapering around to some trimming of the sides at the hips, continuing on to full length at the spine above the hips.
I'm concerned that if the length at the spine, is 5 inches longer than the length of the underside, the vest will become loose across his lower spine/back area.
I'm not real sure he needs a vest for the warmth but the extra floatation might be nice. I do know that to get any warmth the vest needs to be snug all over and that is what I'm not sure about. I think I can live with the slight looseness at the neck, but do you think the vest will get too loose (in the lower back area) when I trim for his privates?
Thanks for you help. I can take and post pics if they are needed.