reedy creek sneak boat

chester sadowski

Active member
does anyone know about or have this sneak boat. Friend of mine told me that a builder made a sneak boat special for reedy creek outfitters. Just wonder if anyone has info. Said it was fiberglass and weighed about 50lbs. If anyou has a pic that would be great too.
 
The Reedy Creek boat was purchased by me. Waterfowl-Works. We have completed the prototype and will have 1 on display at this years shows.

The prototype weighs 40lbs with no hardware attached. All glass and divinecell construction. This boat is light and paddles amazingly simple. a few stroked and it will go for ever. We tested it in Mitchells bay last year and several cans and redheads became dinner from the boat and also used it late season floating down the Great Miami River here in Ohio shooting late season geese.

Here are a few pics of the original Reedy Creek boat before we made some needed modifications to the hull. those mods were what we will call wings(trihull) on each side to create stability. The whole inside is sealed air so no foam will be required.

Come check it out at the Pointe Moullie Show in Michigan or Tuckerton Decoy show.

shoveler4.jpg


shoveler5.jpg

 
The Reedy Creek boat was purchased by me. Waterfowl-Works. We have completed the prototype and will have 1 on display at this years shows.

The prototype weighs 40lbs with no hardware attached. All glass and divinecell construction. This boat is light and paddles amazingly simple. a few stroked and it will go for ever. We tested it in Mitchells bay last year and several cans and redheads became dinner from the boat and also used it late season floating down the Great Miami River here in Ohio shooting late season geese.

Here are a few pics of the original Reedy Creek boat before we made some needed modifications to the hull. those mods were what we will call wings(trihull) on each side to create stability. The whole inside is sealed air so no foam will be required.

Come check it out at the Pointe Moullie Show in Michigan or Tuckerton Decoy show.

shoveler4.jpg


shoveler5.jpg


Tony, could you please repost your picture of the Reedy Creek sneak boats mentioned here? I just found two in a pile of leaves.
 
Paul, broken links are the reason you see the pictures missing from old posts. Unfortunately unless the site hosts the images, we rely on links to see them. Back in the day it was easy to link from FB and many of us did. Then we moved to image hosting sites, but even there if you clean up your folders and move images, you will break the links and not realize it.
 
I heard point blank bought the molds?

See other thread for more info. We own a copyright on this Hull. And no one else bought the molds. We applied for and was granted protection under the vessel hull protection act on the design if this hull in 2012 we use it on the bottom of the UFO for the towable UFO. This is why we bought the reedy creek boat to begin with to copyright the hull design and use it on the UFO layout boat. No one else has these molds and no one else can build them as we own the copyright on this hull. The molds are safe in our warehouse.
 
Back
Top