TDB Classic Rebuild

W

william gaynor

Active member
I recently purchased a TDB Classic hull and deck that was used to make a mold. The boat is covered with bondo. I have spent four hours scrapping off the bondo and have completed only 15 % of the boat, Question is there an easy way to get this stuff off ?
 
Hi John,
How are you shaping up for this years season?
I got the hole repaired and will be out there this year, I missed not hunting last year, first missed season in 30 years.
Now..... to find some long grass out there ????
 
All ready for this season. I'm going to cut some grass this week. I was going to go out today but it was blowing pretty hard.
Glad to hear your back in the game.
 
Thanks John, maybe I'll see you at the SSWF duckboat show.
I'd appreciate info if you find some decent grass out there
 
If you have a high volume air compressor, use a die grinder with blue or gray roll lock scotchbrite pads. Won't leave big divots where you start and you can blend nicely with it. You can get the tool at menards or Lowes and the discs at Lowes, Home Depot or your local Welding supply
 
You must log in or register to reply here.
Back
Top