William Nelson
Member
Anyone from Maine have a piece of white oak 1 inch thick 11x20.....Stuff is hard to come by and my motor board needs to be replaced.
White Oak
- Thread starter William Nelson
- Start date
Steve Sanford
Well-known member
William~
I Cannot help you with that White Oak - but I make my motorboards from treated lumber - 2 x 12 Southern Yellow Pine (used to use White Oak). I try to pick through boards to find something close to quarter sawn.
In fact, I have one in progress right now. I coat it twice with marine epoxy then duckboat paint.
All the best,
SJS
I Cannot help you with that White Oak - but I make my motorboards from treated lumber - 2 x 12 Southern Yellow Pine (used to use White Oak). I try to pick through boards to find something close to quarter sawn.
In fact, I have one in progress right now. I coat it twice with marine epoxy then duckboat paint.
All the best,
SJS
William Nelson
Member
I would have to cut it after it gets here its actually 10 1/4 x 19 and it is shaped to the keel....fairly custom..... do you make them to order
Steve Sanford
Well-known member
PM sent.
SJS
SJS