Search results

Anyone know anything about this blind? I can see it possibly fitting very well on my ducker and solving some issues I have with my current blind. It has overhead camo, it would protect me from the rain and I could put a small ice fishing heater inside to keep me warm when the temperatures drop...

Understood Dave. I still think the bracket would pivot upwards unless the carabiner goes through the seat bracket and the rail area. II'll have to do some noodling on this. The dor you drew is towards the back. I think moving the carabiner to the front end would be better as this is the end...

Should have mentioned if I didn't, I only want the seat in this position when driving the boat, When I get to the hunting spot, I will move the seat more towards the middle of the boat.

I think I made my post more complicated than needed. The issue I am having, is that this bracket pivots. For example, using your picture the seat would still pivot. Where your yellow dot is is towards the rear of the boat. The bracket pivots, not the whole bracket moving upwards. Let's say...

I am trying to figure out the best way to secure this seat. For those familiar with a Lund Ducker, this is the repositionable bench seat. I can pick it up and move it forward or backwards. Kind of a neat feature. One thing that needs improvement is to stop it from tilting when I reach back...

Could use perimeter lighting (fixtures that hold outside flood lights for example). Pint the ceiling with the most reflective paint you can find and point the flood lights up and bounce the light off the ceiling. They also make fixture that hold T8 blubs and reflect the light up instead of...

Did I miss your move to Wyoming? Where at if you don't mind me asking

I play a game others call golf. Not sure this is what I'm doing but I do enjoy the social atmosphere of it. You know why they call it golf? It was the only four letter word left.

I called around asking about replacing just a spindle, and other options. I just decided I was just going to replace the axle and call it good. OEM from Karavan was $130 plus shipping. I thought this to be ridiculous. Took the hubs off the axle and noticed it wasn't the spindle that was...

The axle is square and striaght, the spindle is bent. Believe it or not, it is within spec of the manufacturer. I should just suck it up and buy a new axle with the spindles. I see I can buy just the spindles but I am no welder nor do I know of anyone who does.

Axle is straight and square, Spindle is bent.

But a bent spincle would create a different wear patttern. On the outside of one tire and the inside of the other from what I have read and picture I have seen

Tire date was 2021. Here are pictures of the Axel spindle. On the bent one, the front of the hub is 3/16" farther out from the leaf spring than the back of the hub. Axles measure square.

I agree. In this case, maximum tire pressure was 60 psi. I inflated to 45 psi. The wear pattern on the tires screams over inflation. everyone I have shared the phots with have said the wear is due to over inflation. Thus all my questions as this I have not seen before.

Trailer is square. I'm leaning towards bad OEM tires but want to check everything before putting the new ones on and seeing the same issue.

Did that. Also checked it against my Pick up pressure readers, my wifes car pressure reader, and the air pump pressure reading at Costco. I thought maybe the same but nope