Search results

hunted out of my Sanford box yesterday .

i found a couple this summer and used old fireman's pike poles with the head cut off and the duckbill added. I have a couple fireman buddies that keep me in good supply.

That should fix the problem

Anthony, is that one of Diane's spray dodgers? Could you explain the way you have it rigged up? I have an original Momarsh Fatboy that i was going to rig the same wayThanks

cant have too many canoes

Speck coming off the bench .White cedar and oils.

Is he a DU green wing member yet?

Hi Steve, the epoxy is from u. s. composites . Its the 3 to one mix with medium hardener. The cloth is a 1208 biaxial which has a cloth and mat bonded together as one piece. Ive been using it quite often and am pleased with the results. Its good for repairs as well.

some more herters rehabbed and glassed the freighter.

Working on some 72s and some decoys unlimited field decoys . Most of the birds are done as a favor for a hunting buddy. on the bench is my paint wheel that acts as a lazy susan so i don't have to get up and move birds around. That's Ranger keeping me company.

Glass the boat without the keel in place. Attach the keel with fasteners from inside. Use a bedding compound as well. I would double the layer of glass in this area as it takes most of the abuse. On top of that keel use brass or aluminum half round. High density polyethylene is a third choice.

i can send them to you message me your contact info

Seems like if one guy in your crew has a 3 bird license , it's an insurance policy against an oops bird. In the old point system there was a lot of reshuffling the deck. I'm not advocating doing that but just trying to expose some potential flaws.

These may be the plans for the boat. I have detailed building instructions that were provided.

Well i got most of the twist out of it . I would not call it fair, but i pulled it in at one point 5 inches. I took my detail tool and cut the inwale free of fasteners and dropped it about an inch. Probably did 50 laps around the boat checking on things. Just about out of oak but glued up the...

I got her flipped and I have some problems. As you can see by the inwales the old girl has settled and my fair curve has disappeared. I'll have to noodle on that a bit. some water and steam plus some station molds should get her back.

I replaced the original transom using the old one as a pattern. I left it uncut for the motor because i'm not sure if I am using a SS or LS . I doweled together two pieces of ash and used epoxy and nails to attach. My plan is to at least have the hull glassed by the fall. I started this project...

Getting back to this project after a long time. Had to saw some thin planking out of cedar and patch some rot but overall the canoe has come through without much more damage than when I started a few years ago. The bottom had a little oil canning and i used a jack from the inside to fix most of...

Hey George , whats the story on the teal rig? For you or customer. They look good