Clear Vinyl Adhesive?

[Paul Tychsen]

Gentlemen-

Question regarding the spray shield on a layout I built. I bought 20mil clear plastic vinyl in a 54" width. I slit it down to 18" widths and will splice it together to get proper length.

At the top of the spray shield, I must create a seam to thread the length of circular conduit through that will form the rigid top of the spray shield. I know that clear vinyl is typically welded, but I can't find a local company to weld the seam for me. I bought loctite stik'n seal original waterproof adhesive - which claims to be a permanent, waterproof, clear, flexible bond. I tested it on a small piece and I was able to pull the bond apart after proper set time.

My question - any thoughts on a clear flexible permanent adhesive to use to create the seam?

Thanks-
Paul

 

[Sam]

Is it heavy enough that you could stitch it with monofilament or something?

 

[Mike Repp]

Paul you might want to try this:
http://www.liquidnails.com/products/product.jsp?productId=32

What ever you use dont use cynoacrylates they will cloud the material

 

[Richard Buhr]

Paul,
This worked for me with their clear vinyl.
http://www.rochfordsupply.com/shop/Adhesives_and_Sprays/Bulk_Adhesives/HH-66_Vinyl_Cement/index.html I did not use thinner.
Richard