clinker/lapstrake duckboats?

AlexCole

Member
I admit that I know nothing about building boats, but have been doing a lot of reading on the subject lately. Why is it that the vast majority of "homemade" duckboats are stitch and glue, with a small amount being strip-plank, most notably David Clark's 16' cackler that remains unfinished and is screaming at me from NY. But I digress, is there/are there lapstrake duckboats that I just have not encountered yet, or am I missing something and there is something inherent about a lapstrake boat that makes it a poor duckboat??? Any info is appreciated. Thanks, Alex.
 
Stitch and glue boats are fast and some of the easiest boats to build vs a planked boat. In addition some hull desings can not be built in a stitch and glue fashion due to the curves in the hull. I'm sure some guy can go into alot more detail on this topic but this is the short version
 
The solid wood planks needed to make a traditional lapstrake boat would be very expensive, if you could find them. Although, I have seen lapstrake done with plywood. But either way takes a lot more skill and time than strip or stitch and glue. It is all about economics of time and money.
 
Back
Top