Brad Taylor (NC)
Well-known member
Probably the most oddest classified post I've ever done. I just completed this boat for Tim back in August, unfortunately, Tim had some issues with job come up where he is being forced to sell her at a loss. I know for a fact he has well over $8500 invested in the rig. It is killing him that he is going to have to sell it, especially at a loss. In his first day with the boat, he won a DU duckboat contest that took place on Merrymeeting Bay. He asked me for help in finding her a new home and I gladly obliged. He is asking $7000.
If you have any quesitons about the boat, you can contact me here through pm, via email at bhtaylor@carolina.rr.com or by phone at 704.232.0272. If you would like to speak with Tim directly about viewing/testing the boat or negotiating price you can reach him at tim@t-mitchell.com
The boat is constructed out of okoume ply, has a 20hp Yamaha 4stroke that has less than one hour and sits a new Road King Galavinzed trailer with full size spare. As for particulars, the bottom of the boat is coated in graphite making it slick and tough. The interior has sprayin liner on the floor and partially up the chines. It has full emergency floatation and rates for a 20hp motor, 2 people, 870lbs of people/motor/gear. Accessories include 2 12v aux outlets, 9 LED lights located throughout the cockpit and in each compartment, running lights, quality BEP switch panel, 1000gph bilge, blind doors, 2 shell/drink holders that hang from the coaming, movable running seat, and recessed fog lights. All wiring is marine tinned wire and for that matter all components are top of the line with no skimping on materials. Also, she has a cockpit cover that fastens down for traveling. If you would like to see more on the specifications of the boat you can do so at my website, http://www.tollerboatworks.com
She hops on plane easily and will run 27 with no load. It will easily keep the bow up if the weather gets snotty. This is a rare chance to get a completed boat from me with no wait time and at at savings of close to $2000.
Here are a couple of pictures of the boat. Again if you have any questions, feel free to ask.
Thanks,
Brad
If you have any quesitons about the boat, you can contact me here through pm, via email at bhtaylor@carolina.rr.com or by phone at 704.232.0272. If you would like to speak with Tim directly about viewing/testing the boat or negotiating price you can reach him at tim@t-mitchell.com
The boat is constructed out of okoume ply, has a 20hp Yamaha 4stroke that has less than one hour and sits a new Road King Galavinzed trailer with full size spare. As for particulars, the bottom of the boat is coated in graphite making it slick and tough. The interior has sprayin liner on the floor and partially up the chines. It has full emergency floatation and rates for a 20hp motor, 2 people, 870lbs of people/motor/gear. Accessories include 2 12v aux outlets, 9 LED lights located throughout the cockpit and in each compartment, running lights, quality BEP switch panel, 1000gph bilge, blind doors, 2 shell/drink holders that hang from the coaming, movable running seat, and recessed fog lights. All wiring is marine tinned wire and for that matter all components are top of the line with no skimping on materials. Also, she has a cockpit cover that fastens down for traveling. If you would like to see more on the specifications of the boat you can do so at my website, http://www.tollerboatworks.com
She hops on plane easily and will run 27 with no load. It will easily keep the bow up if the weather gets snotty. This is a rare chance to get a completed boat from me with no wait time and at at savings of close to $2000.
Here are a couple of pictures of the boat. Again if you have any questions, feel free to ask.
Thanks,
Brad
Last edited: