Hey all. Looking for advice to fix water in my decking. I took out the bilge pump bracket, water started leaking out of the screw holes. The was at lease 2 gallons so far. Did three exploratory 1/2 in holes to see where the water was located. It seems like under the laminate decking is Nida-Core Honeycomb.
The two outer holes were dry while the darker hole next to the bilge pan was wet and mildew.
I was thinking to cut out a the red stripe. Put the boat back in a tilt towards the transoms. shop vac and dry it over a day or so. Then replace with foam, then refiberglass the decking.
Any advice is certainly welcome. Thank you!
The two outer holes were dry while the darker hole next to the bilge pan was wet and mildew.
I was thinking to cut out a the red stripe. Put the boat back in a tilt towards the transoms. shop vac and dry it over a day or so. Then replace with foam, then refiberglass the decking.
Any advice is certainly welcome. Thank you!
