Search results

My parents have a litter of the curly monsters right now. I’ve been going over on weekends to play with them. Having 9 of them climb all over you is better than Prozac!

Beer keg works and is durable. The 1/4 keg size.

I used to use aluminum airplane rivets that you can get from McMaster Car part # 97484A245 Last time I replaced rivets, I used #10 stainless machine screws with a lock nut and a little 5200 I'll never use a rivet again

The time has come to replace my outboard It's a 14' Starcraft with a 20 hp short shaft I have found a great deal on a new long shaft 20 hp I can build the transom up 4" taller to accommodate a long shaft motor Performance wise, would there be any advantage to not changing the transom and finding...

Thanks Never fished out here before I did a little research online, but wanted to try for some input with local knowledge

My job has me in SeTtle for the next week and a half I'm going to have some down time towards the end of the week Does anyone have any experience with fishing charters in the area?

I've heard of making them out of an aluminum baseball bat

a buddy has a Scotty from the 60's but it spent a good bit of time in a barn The only two big issues he had that I know of were the door handle broke and where the siding was pulled away from the floor at the back from being dragged over a curb Scotty's have a large following and there is an...

5 mil with 1600g of thinsulate are pretty heavy. I have a pair like that. Usually I wear a pair of good wool socks with jeans and a sweat shirt. Wind blocking, hooded fleece pullover on top of that, then a heavy parka that I can take off to regulate my temp. Staying warm enough is not a problem...

I watched from Crisfield too Dave, did you fish Red Trout?

Gene I agree with what you're saying The reason I replaced my A-5s with the Benelli was because I was beating them up so much in the field. I wanted a dipped gun with a synthetic stock to be more durable. After shooting the Benelli for a few years it was stolen along with my truck. This...

Like Hank said. The internal parts are almost identical to the Benelli. Also, just like my Benelli, it's a lot smoother than my old A-5s. Seems to be a nice gun, but Browning has brought a lot of nice guns to the market that were supposed to be the next A-5 so we will have to wait and see if it...

I consider waders to be almost disposable, but that is due mainly to me. I have had good luck with the cabela's dry plus and got two years of hard use out of my last pair (oyster shells, mussel shells on the bank, and green briar) I just bought a pair of Waterfowl Wading Systems from Gander...

More of a low tech solution Can the key be modified so it can be removed without turning off the ignition You might need to check with a locksmith but I used to drive a ford that the key had worn enough to remove it while in the on position and I think chevy's had a particular nub you could...

McMaster Carr has a good selection of rivets and you can get them in lots of 100 Stainless steel machine screws work well too and are easier to get tight by yourself Seal them with a dab of 5200 I've used both methods and prefer the machine screw method

I use a 2:1 vinegar oil mixture in a spray bottle for most things that I am grilling for a long time or smoking. A couple of sprays every 30 min or so to keep the surface moist really helps to keep even large roasts from drying out

Does the fuel bulb stay tight when the motor starts to bog down? I had a similar problem with my 20 merc that is the same year. never did figure out what the problem was exactly, but after me and my mechanic both rebuilding and cleaning the carb and fuel pump several times it stopped doing it...

I'll guess shore sportsman on Kent Island for the sign That picker looks like the one Charley Babe in St Michaels had when I was a kid He never used it, that I saw, said it bruised the birds He always had a bunch of daughters, nieces, and cousins picking away

No worries, it happens Tempting though, you could buy an awful lot of decoys with that kind of money

Anybody else get a pm from edward kwame about a "business opportunity"?