Mark W
Well-known member
In my ongoing quest to stay light, I started looking for the lightest, easily transported dozen decoys I could find. Most were from another time and place and a couple of folks on this site had some decoys they would sell (thanks to those folks). Somehow I had come across a newer site, Banded Mallard. They seem to have similar decoys to the old Flambeau Feather Flex decoys. Site claimed they weighed next to nothing and they could be stacked for easy transport. I looked around the web for reviews but they were not to be found. Birthday was a couple months back and a dozen of these decoys were on the suggestion list. Wife actually purchased these and I've been toying with them for some time now. For what I was looking for, they fit the bill pretty nice. I don't how they will work fooling ducks but I've seen old Clorox bottles fool ducks so we will see.
As advertised, these decoys are light. If a dozen of them weigh a pound I would be surprised - seriously. They also stack very nicely as 12 stacked on top of each other would easily fit into a small backpack with room for other stuff. A small difference from the older decoys, these bodies are flocked, or something very similar to flocking. Wonder how this will hold up over the years.
View attachment BM1.jpg
I added a swivel on the bottom of the head and used some mono and a sliding 2oz egg weight to keep the decoy in place. Don't think I will need anymore than this as the decoy is quite light. I've floated one a couple of times and the weight seems fine. I did notice that with the head being in the front (duh), the decoy does have a slight forward leaning stance. Nothing a little bit of tire weights, or lead tape won't fix.
View attachment BM3.jpg
View attachment BM4.jpg
Since my goal is one small backpack to carry everything in, I found a way to attach both the bodies and heads to the backpack that should work. Not the best picture but the bodies are just held together with some mono and attached to the outside of the backpack. The heads with about 3' of mono are looped through the shoulder loops and then attached to the backpack as well. This way they won't be hanging down low and catching on stuff.
View attachment BM5.jpg
Will know in a few short months how this all works out.
Mark W
As advertised, these decoys are light. If a dozen of them weigh a pound I would be surprised - seriously. They also stack very nicely as 12 stacked on top of each other would easily fit into a small backpack with room for other stuff. A small difference from the older decoys, these bodies are flocked, or something very similar to flocking. Wonder how this will hold up over the years.
View attachment BM1.jpg
I added a swivel on the bottom of the head and used some mono and a sliding 2oz egg weight to keep the decoy in place. Don't think I will need anymore than this as the decoy is quite light. I've floated one a couple of times and the weight seems fine. I did notice that with the head being in the front (duh), the decoy does have a slight forward leaning stance. Nothing a little bit of tire weights, or lead tape won't fix.
View attachment BM3.jpg
View attachment BM4.jpg
Since my goal is one small backpack to carry everything in, I found a way to attach both the bodies and heads to the backpack that should work. Not the best picture but the bodies are just held together with some mono and attached to the outside of the backpack. The heads with about 3' of mono are looped through the shoulder loops and then attached to the backpack as well. This way they won't be hanging down low and catching on stuff.
View attachment BM5.jpg
Will know in a few short months how this all works out.
Mark W