Black Brant III Build

D

Daryl Baker

Member
Some pictures of my duckboat project. Hope to hunt with it this coming season. I used a 2 part auto primer and Parker duck boat paint. Bilge pump/hose under the floor. Had to notch the bottom edge of the floor to get the hose into the flotation compartment. Solenoid for the battery disconnect. Switches are master, bilge, interior LED lights, and running lights. The Yamaha electric start cables will hook to the terminal block. Switch box is powered with wires from the terminal block. More pictures in next post.

View attachment 004.JPG
View attachment 005.JPG
View attachment BB3 005.JPG
View attachment 004.JPG
View attachment 003.JPG
 
Daryl, the bb3 looks great! Keep up the good work,you are on the downhill run now,you are really going to enjoy this rig,great job! Brian Rippelmeyer
 
Get the trailer from Joe yet?

33 days until the season opens Daryl........If you haven't rigged your decoys yet, we can do it at my place if the
timing works for you, I don't get out of work til 5, and need to coordinate with HS v-ball games.
 
Last edited:
Very nice build Daryl............One problem I see is water getting in to the floatation compartment around your bilge hose....make sure you seal this area VERY well seeing how it is below any area that would fill with water. You do not want that floatation foam absorbing any water.
 
You must log in or register to reply here.
Back
Top