If you carve and use a delta bandsaw or clone with the 14" (older) or 16" (newer) square table I have a question. Do you find the table large enough for your decoy needs or do you wish you had a bigger surface for cutting blanks or other tasks?
Delta Bandsaw Question
- Thread starter Eric Patterson
- Start date
Lee Harker
Well-known member
For cutting sheets of cork a larger table would be nice.
Nate Grace
Well-known member
I have a 1 HP Jet with the 14" table and find that it does everything I need it to. I've cut cork, plywood sillies for eider sleds, sheets of luan, and cedar blocks for decoys. Does a great job. For cutting sheets of cork, one of those roller stands would be great to hold up the rest of the sheet as you push it through the blade.
Nate
Nate
Brian Story
Active member
Eric,
We use an old 14 inch Rockler with a riser and find the table size fine. I'll cut some cork and a few tupelo blocks. It would be nice to have a larger table for resaw work.
How is momma and the pups?
Brian
We use an old 14 inch Rockler with a riser and find the table size fine. I'll cut some cork and a few tupelo blocks. It would be nice to have a larger table for resaw work.
How is momma and the pups?
Brian
