Pretty cool moment...

Brad Taylor (NC)

Well-known member
Don't know if any of you have seen the magazine American Waterfowler, but Toller Boatworks and the NFZ were listed right there with some of the big boys such as Duckwater, War Eagle, Excel and some others. The title of the piece was "Throwback with a modern twist", along with a picture of the NFZ and a little write up on Toller Boatworks and the NFZ features.

Would have never thought that when I built my first boat 8 years and 21 boats ago it would have come this far. Its definitely a labor of love. On a related note, I met with a good friend and owner of an aluminum fabrication shop today and it looks like we are going to build the NFZ from aluminum. Life is definitely good :)

In case you've never seen it, here's the pic they used in the magazine and it will be in the fall equipment issue as well.

On_water.jpg


Thanks and just wanted to share.

Brad
 
Brad,

Sounds to me like you must be doing something right. Congrats on the recognition and write up. I hope it helps move your life in the direction in which you would like it to go.
 
Thats awesome! Congrats! Its so great to be able to do what you love and you are great at it. Keep up the good work
 
Brad
congrats mate on the write up and you deserve the reconision you have been going hard at it for the last eight years and one day in the future, Cole will be able to say my dad built that boat, well done Brad.
Take care and God Bless
Eddie and Amber
Its all about Building that Bond.
 
Greatly appreciated fellas.

Eddie, sorry I missed your call. Life never slows down with a 3 year old running around the house! Shoot me a pm with the email address and IP address you are trying to register with over on Gator Boats and I'll get you fixed up. Not sure if you are aware but since the site was hacked and they restarted the forum, you will have to reregister so your old username/password won't work.

Thanks again to all.

Brad
 
Don't know if any of you have seen the magazine American Waterfowler, but Toller Boatworks and the NFZ were listed right there with some of the big boys such as Duckwater, War Eagle, Excel and some others. The title of the piece was "Throwback with a modern twist", along with a picture of the NFZ and a little write up on Toller Boatworks and the NFZ features.

Would have never thought that when I built my first boat 8 years and 21 boats ago it would have come this far. Its definitely a labor of love. On a related note, I met with a good friend and owner of an aluminum fabrication shop today and it looks like we are going to build the NFZ from aluminum. Life is definitely good :)

In case you've never seen it, here's the pic they used in the magazine and it will be in the fall equipment issue as well.

On_water.jpg


Thanks and just wanted to share.

Brad

Brad, if you can keep the attention to detail and quality I've seen exhibited in your build photos, aluminum versions of your boats should do very, very well.
 
Just goes to show you where hard work and dedication will get you. Congrats to you, it is well deserved!
 
Back
Top