Running fuel line

Brian Miller said:
Does anyone have a trick for neatly running a fuel line to the front of a sneakbox? I’d just like to keep it neat and off the floor.

Thanks!

Brian
Click to expand...
I ran my main line of copper 3/8 inside of half-inch PVC tube up into the corner of the Gunnel. Then went to regular fuel line by the tank and Motor
 
I have the fuel line in a protective loom, I’m more trying to find a clean way to hold it down as the boat is just glass so screwing any type of clamp is probably out of the question.
 
Run line inside of Scd. 40 conduit of correct size and tuck it under combing or along floor. In electrical Depts. of Lowes you,ll find adhesive black plastic/nylon little square mounting points that a zip tie can be run thru to secure conduit or wiring. Instead of trusting the thin adhesive strip that comes on it put a dab of 5200 on hull and stick in place. Don,t mount conduit into it till it sits up completely. I,ve used these for years running wiring and small conduit and they work well except for the factory adhesive eventually letting go. If needed you can even heat the conduit with a heat gun to get gentle cures to follow contours of application. Black zip ties will hold up for a long time out of sunlight & weather and when they eventually fail simple & quick to replace. Getting ready to do this exact thing on a Ghenooe i,m making a front spot light mount for. Be running wireing in it to battery/switch point.
 
Last edited:
You must log in or register to reply here.
Back
Top