Devlin’s Mallard Build

[Shawn_B]

SJ, I should try this.

 

[Dennis P.]

First question here. After reading some of your posts, I’m thinking that I should build up the keel fillet with more material. The only thing is, I already glassed that joint. What do you guys think? Too late?, not necessary? or should I go for it?

If you can get a copy of Renn Tolman's book- 'A Skiff for All Seasons' I think his explanation of epoxy filleting and taping is one of the best out there.
He preaches economy of epoxy - no need to goop it on. No need to add more layers. iirc, 2 overlapping layers of 10oz cloth on a Tolman keel. Maybe it was 6 oz.

 

[Shawn_B]

Here is what I came up with to reinforce the hull, at least a little; I think
It’s not the best craftsmanship ( I thought of this after I had already cut the floor beams)but it should do.

 

[Eric Patterson]

That should be plenty strong. Nice work.

 

[Shawn_B]

Thank you Eric, I’m going to start sanding and fairing soon. What fairing compound do you all prefer?

 

[Eric Patterson]

For structural filler I use wood four and cabosil. For fairing compound I use phenolic microballons.