Mark W
Well-known member
I am looking for a small screw manufacturer or a distributor of very small screws. Here is what I am looking for.
M1.4 Trapezoidal Thread
Pitch 0.25mm
Thread angle: 60?
Thread diameter: M1.4 (1.2mm, trapezoidal)
Screw length: 3mm
Head: 4.15mm x 0.65mm
While I believe these specs to be accurate, may be off slightly. Current head is a Phillips head and I want to have either a torx head or something less prone to stripping the head. I have a few current screws I am trying to replace that I can send or bring to the manufacturer or distributor so they can ensure my measurements are accurate.
Thanks -
Mark
M1.4 Trapezoidal Thread
Pitch 0.25mm
Thread angle: 60?
Thread diameter: M1.4 (1.2mm, trapezoidal)
Screw length: 3mm
Head: 4.15mm x 0.65mm
While I believe these specs to be accurate, may be off slightly. Current head is a Phillips head and I want to have either a torx head or something less prone to stripping the head. I have a few current screws I am trying to replace that I can send or bring to the manufacturer or distributor so they can ensure my measurements are accurate.
Thanks -
Mark
Last edited: