New Predator BBSB Sneak boat (formerly the Chuck Huff BBSB) info

Tony,

I wonder about the placement of the bow navigation light. It seems from dead ahead, it might well be obstructed from view by the center grassing rail combined with the low mounting height of the light itself. Depending on just how the hull is loaded, and how bow up the boat rides, with the light being as far back as it is, the tip of the bow may also hide the navigation light when viewed from dead ahead.

It might sound a bit nit-picky but I tend to be that way with all my lights, boating and trailering wise. :>)
 
For those who may be interested, I found the predator was on waterfowl works web page along with some more details on pricing and packages
 
Tony when are we going to see YOUR boat get wet?????
Click to expand...
next week I recieved a call today the dodger was done I will pick it up mount it and we are off to the water for some sea trials. Stay tuned.
 
Test fit the spray dodger today, Got some minor kinks to work out. We are adding extensions on the sides to give better support to help hold the dodger taught. And while we wanted to use the same attachment system we use on the TDB boats its just to bulky for this small boat so we are going to be changing this. We are going to use twist lock attachements on the deck and will use HD snaps on the sides of the duck boards when the extensions are added. This will block all water from coming inside the cockpit and will push it right back off the deck easily.
We will also be adding a composite motor board to the inside transom to protect the transom from scraps and damage from the motor and lastly we have a custom Brant Handle that will be being molded and put on the bow of the Predator. a nice finishing touch I think to this eastern shore style boat. We take things very seriously and use only the best materials and products and finish our products the right way. No corners cut and I believe the final results will show just that. We have put this boat on our website for those who want more information.







 
The Handle, this will be molded and cast from urethane resins in Black. drilled and bolted to the bow. Not only is it a handle but it also is designed as the front cleat as well. Hope you like it. These are unique and one of a kind made specifically for us and will be our sneakbox trademark.
Over 12.500 views on this thread, Next step water testing as soon as weather permits.




 
Last edited:
Would you just sell the canvas dodger? I think it would fit on my Higbee.
Click to expand...
Bob of course. Couple little kinks to work out and were off and running with them and I agree It should fit a Higbee very well as with most sneak boxes.
 
all I have to say is I am glad you did share with us your process. I gives us somethings to think about when we are looking into our boats. thank you tony
 
You must log in or register to reply here.
Back
Top