Installing deck

[Richard Lathrop]

Richard Lathrop submitted a new resource:

Installing deck - Widgeon, top, deck, exterior

After the interior paint dried, I removed the masking tape. Using 1/4 ply I fit the stern and bow pieces. I scribed the exterior and the layout of the ribs on the underside. I then marked the screw spacing and drilled pilot holes. I find this a better way then trying to locate the center line of the ribs. Starting at the stern I installed that piece first. I gave the interior a coat of epoxy to seal the wood and to attach the top. I also coated the top of the ribs to prevent glue...

Read more about this resource...